D stop bar T50615

D - Stop Bars

P/N: T50615


Unique and versatile D-Stop Bars, with spring loaded plungers, are an efficient way to locate and position stock against a stop.

The D-Stop Bars are "distortion tolerant", tolerant", for welded structures allowing easy part removal. They consist of a rounded end stop, a flat end stop, and long stop edges, and can be locked into position with Ball Lock Bolts or Socket Shoulder Screws. Use the round end to locate any round or irregular shaped parts. Full length slots give you numerous mounting positions.

The Anodized Aluminum D-Stop Bars are lightweight and easy to maneuver. Mount D-Stop Bars using 3/8-16" hex head screw. Must be used with Threaded Adaptors, (sold separately) Part Nos. TXT5204 or TXT5304.

Part No. Dimension (in) Slot Length (in) Threaded Holes Threaded Holes Distance (in) Weight (LBS.) CAD
T50615 3.6 x 1 x 0.5 2.4 2 x M4 0.65 0.09 IGS | STEP
T50625 3.6 x 1 x 1 0.16 IGS | STEP
T50635 6.2 x 1.25 x 0.5 4.6 2 x M5 0.87 0.21 IGS | STEP
T50645 6.2 x 1.25 x 1 0.40 IGS | STEP
D Stop Bars application 1
Use the side of the D-Stop Bar as a stop. Mount Clamps, such as Toggle Clamps, on D-Stop Bars to clamp at varying heights.
D Stop Bars application 2
Use the D-Stop Bar as spacers to elevate the workpieces. D-Stop Bars can be clamped to the BuildPro® Tabletop using Ball Lock Bolts.
D Stop Bars Set application 3
The spring loaded pin provides variable pressure for the quick locating, placement, and removal of stock.
D Stop Bars Set application 4
Use the round end of the D-Stop Bar to hold against curved or odd shaped stock.

Optional Toggle Clamp Accessories

Toggle clamps can be mounted on top of the D-stop bars. Toggle clamp clearance can be raised by using thicker bar, or by stacking bars to achieve your desired height. (As shown in photo)

  • Two M6 screws needed for mounting. Larger holes can be tapped by user on the bottom face.
  • Refernce Max. Opening for clamp mounted on a 1/2" thick Stop bar with NO spindle. Please allow room for spindle head thickness. Add additional bars as needed for use as risers.
  • Standard spindle included. See Good Hand™ Toggle Clamp website for full selection.
D stop bars with toggle clamps group 2 D stop bars with toggle clamps group 1
Part No. Handle Ref Max. Opening (in) Spindle Reach (in) Weight (LBS.)
GH-102-B Vertical 1.26 0.52 - 1.32 0.25
GH-13005 Horizontal 1.0 0.55 - 1.05 0.13
GH-13005-HB 1.5 0.55 - 1.05 0.16
GH-20300 1.5 0.24 - 1.35 0.22
GH-22100 1.5 0.3 - 2.5 0.24
GH-201-B 1.5 0.9 - 2.0 0.29
GH-201-BHB 2.16 0.9 - 2.0 0.32