Channel Block Set

Slot Filler Kit

P/N: T50930


Use the Channel Block and Rest Button when a flat, continuous support surface is required directly over the 1.7" table slots.

Place the 3-hole Channel Block beneath BuildPro® plates, aligning with plate holes, and mount with Socket Head Shoulder Screws. Place the Rest Button in the center hole of the Channel Block to provide a rigid work surface level with the tabletop.

The 5/8" shank on the Rest Button slip fits into the Channel Block holes. To elevate a workpiece above the tabletop surface, place multiple Rest Buttons directly into the 5/8" holes on the Buildpro™ plate.

Part No. Description Weight (LBS.) CAD
T50930 Channel Block, 1 pc
Rest Button, 1 pc
Flush-mounted Screws, 2 pc
2.4 IGS
Rest Button and Channel Block application 3
The Slot Filler Kit provides a solid work surface directly over the 1.7" slots in the BuildPro® Table.
Rest Button and Channel Block application 1
After mounting the Rest Button and Channel Block, the "filled" channel is level with the BuildPro® Table.

Channel Block

Part No. Dimension (in) Hole Dia. (in) Weight (LBS.) CAD
T51003 6.3 x 1.6 x 0.63 5/8 0.6 STEP
Toggle Clamp Base Plate T511110