Standard Magnet Squares - Multi-Angle

Holding at multiple angles while soldering, brazing, and welding at 30°, 45°, 60°, and 90°.

• Fully enclosed for easier cleaning.
• Center hole for easy handling.

Must be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 176ºF / 80ºC.

MS45
45°, 90°

MS60
60°, 90°

MS346C
Multi-Angle

Part No.	Angles	Max. Pull Force	Dimension	Weight
MS45	45°, 90°	65 LBS (10 kg)	4-3/8 x 3-3/4 x 3/4″ (113 x 98 x 19 mm)	1.0 LB (0.5 kg)
MS60	60°, 90°	55 LBS (25 kg)	4-3/8 x 3-3/4 x 3/4″ (113 x 98 x 19 mm)	1.0 LB (0.5 kg)
MS346C	30°, 60°, 45°, 90°	85 LBS (40 kg)	4-3/8 x 3-3/4 x 7/8″ (113 x 98 x 23 mm)	1.75 LBS (0.8 kg)

* Magnetic force is based on the longest side of Magnet with 3/8″ thick steel.