Locate or clamp your weldment at or beyond the table edge, by mounting the Side Bracket at the edge of your Slotted Welding Table.
Use the Side Bracket to vertically mount clamping elements, such a...
Receiver Bushing
Use the Receiver Bushing with Ball Lock Bolts [Adjustable models and T55015] when mounting two fixturing elements together slot-to-slot.
Steel Balls and O-Rings
An accessory kit in...
Long slots make these precision machined Straight Edge Stops infinitely adjustable in fixturing applications and squaring up parts.
Use with V-Blocks for the adjustable fixturing of round tubes.
These precision-machined angle squares hold material at 90º. The holes and slots combination allows for infinite adjustments in fixturing.
For heavy-duty applications, see the Riser Blocks.
Replacement of the stud on the 5/8" Inserta Pliers.
Thread size: 5/16-18
* T54620-02 is not compatible with Inserta Plier PTT522K. If you need the assembly replacement (with M8x30 thread size), ple...
A 7-piece Set of Shims offers the option to create height-adjustable work surfaces.
The individual Shim can be utilized to compensate for height differences of 0.02″ ~ 0.24″. The measurements are s...
Securely mount your Locking Chain Pliers with the Table Mount Base Kit. Designed to fit 5/8" holes of your welding table, this kit ensures your pliers stay in place as you work.
* Mounting bolts no...
Place the Inserta Clamps into the 5/8″ holes on the BuildPro tabletop and squares for fast, easy clamping. Clamp in the vertical or horizontal position at any height.
The Ratchet Handle Model is id...
It allows you to precisely place the tip of the Inserta Pliers anywhere on the table surface.
The Adaptor swivels 360° and provides a 1” extension of the Inserta Pliers base for the extended reach,...
Magnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces.
Stack Magnetic Rest Buttons to elevate workpieces in 0.45″, 0.625″...
An essential time-saving fastener. All Ball Lock Bolts are a time-saving and efficient method of locating and fastening fixture elements to the tabletop without having to reach underneath the ta...
Using the “CAM” design principle, the eccentric pad provides a quick way to position the edge of the workpiece to a locating stop. The 360º rotation allows infinite adjustments.
Ideal for locating ...
Developed by customer demand, the Adjustable Rest is operated manually, by hand adjustment, with a turn of the easy-grip knurled band for complete control in precise, minute height adjustment....
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
WES ROBINSON
Great tools at a reasonable price
Recently I purchased the Magtab 1.0, welding finger, 20.5” F clamp and a centering head. All of the tools are great and well thought out compared to other brands. The only thing I ask is that the company would add a small and large centering head. Your centering heads are higher off the metal which allows you to line the punch up on your circumference line easier. Continually use my tools and beat on them and they keep working great. Thank you
Medium-Duty F-Clamp, 12.5" (4-in-1)
Cole
Good quality
Bought a few of these on a good sale. Very good quality for the price you pay. Will buy these again.
Medium-Duty F-Clamp, 12.5"
Harry Johnston
Tool Time
I buy your tools all the time.
I have been doing Pipe work for 46 years
and a lot of your new tools make my job a lot
easier.
Keep cranking out new tools.🛠️
Harry.
Magnetic Pipe Centering Head
Dan Neuroth
8 lug
I bought 4 the 2 5 lug fits tight and so does the 3 lug. The 8 lug one fits really loose on the knob. The other ones I ordered fit snug and work good but the 8 one is loose and kind of just sits on the knob but will fall off if moving the welder around. I did email my concerns and haven’t heard back.
EZ-View Gas Cylinder Valve Indicators
Matthew Bartochowski
Welding Aid
I used these to hold a Freon tank that I was working on. The holding power is very good and made the job easier. Don’t put the magnets together because you will have to work to get them apart. Very handy tool if you are working on cylinders.
