Set of four 1" Magnetic Plug / Rest Button can be used on any flat surface, inserted into the holes on the BuildPro® Table or the holes on BuildPro® Economy Clamping Squares.
Magnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces.
Stack Magnetic Rest Buttons to elevate workpieces in 0.45″, 0.625″...
The rest button serves as a part rest to elevate parts above the tabletop.
T54200 can be used in combination with the Channel Block to “fill” any of the 1.7″ slots in the tabletop, creating a so...
V-Blocks are designed to hold round parts.
They fit into the holes of the: BuildPro Table, D-Stop Bars, V-Spacers, Riser Blocks and Right Angle Brackets.
Use the V-Block Spacer to elevate V-Blocks 0.47" for height uniformity when fixturing with the Straight Edge Stops.
Mount V-Blocks on V-Block Spacers to equal the height of V-Blocks mounted on Stra...
The Bend Rest supports round stock at bends and elbows in fixturing, preventing lateral movement and providing clamp support.
The low profile design allows use of multiple Bend Rests as needed to e...
Use the Setup Cone to locate and position round tubing horizontally or vertically through the centerline. The Setup Cone locates from within the tube ID [max. 1-1/2"] at the tube ends, allowing for...
Slide the T-Slot Adapter into any table slot to create a Ø5/8 table hole along the table slots as needed in fixturing. (Tapped hole is consistent with table hole depth and diameter.)
Locate and mou...
